Hand-held ratchet tool for Overhead/ Underground sleeves #8-250 kcmil

General Details

全循环棘轮压接钳
POPPER™ HYTOOL™
可压接可断线

• 钳体由热处理钢制成,配以钢合金钳头和不锈钢压模,绝对坚固耐用。适合架空线路作业
• 使用W28K切刀,可剪切最大127平方铜铝线
• 5/8直径套管一次压接成型,压接符合UL标准
• 可根据现场需要选择全力度或半力度操作方式
• 压接力: < 8,000 lbs

适用于
铜线 #8 AWG – 250 MCM
铝线 #8 AWG to 4/0 AWG

 

The OUR840 incorporates a full cycle ratchet and cam mechanism allowing an easy, one hand crimping action. Designed for low maintenance operation. The OUR840 has a fve (5) year limited warranty. The ratchet mechanism provides for properly completed crimps every time before the tool can be removed from the connection. With nest and indentor dies, it will install 5/8″ INSULINKM and LINKITM service entrance connectors with only one (1) crimp per end. With the use of reduced handle force “X” dies, additional splices, taps, and terminals can be properly installed. The die inserts snap into the permanent groove easily with one hand and lock securely in the tool with the spring loaded positive lock die retainer buttons.

Tool operation is simple:
A. Slip the tool over the connector
B. first few strokes grip the connector
C. Stroke until automatic tool release signifes a completed compression

Features

• Allows proper crimping of sleeves and terminations in crimping underground applications
• Proper crimps are assured with butting surface inspection and full cycle ratchet mechanism
• Uses reduced handle force “X” dies
• One tool for most service applications
• Improved service through redesign and mprovement of many internal parts
• Easier tool operation is provided with mini strokes and anti-slip grips
• Nest and indenter dies available
• W28K cutter die permits use of OUR840 tool as a cable cutter. Conductor range: #4-4/0
• UL Listed connections when color coded “X” dies are used on BURNDY@ connectors

在线客服
在线客服
热线电话
QQ客服
电子邮箱
微信客服